Hillman 3/4-in Wire Rope Clip in the Chain Accessories department
Used to connect two pieces of chain or to connect a fitting to chain. Assembly requires fitting the body rivets of one half into the openings of the other half and then peening the rivets to lock the halves together. Industry standards recommend using one size larger than the chain being joined. Used with chain of equal or lower working load limit. They are easy to install and are hot-dipped galvanized for durability and excellent corrosion resistance.
Hardware Essentials 5/16 in. Thick x 1-3/4 in. Length Hot-Dipped Galvanized Forged Steel Connecting Link (5-Pack) 322030
Everbilt 1/16 in. x 50 ft. Galvanized Steel Uncoated Wire Rope
Hardware Essentials Ferrule and Stop Set complete with aluminum finish. Available in several sizes. Intended for light duty uses. Both ferrules and stops should be fastened with a swaging tool. Ferrules are used to join two lengths of wire rope together. Stops help prevent movement of rope beyond a point.
Hillman Cable Ferrule and Stop 852036
Hillman Cable Thimble (Size 3/16) : Industrial
HILLMAN 44653 Screw, #12 Thread, 3/4 in L, Oval Head, Phi
5/16-In. x 2-3/4-In. Wire Round Lock Pin
HILLMAN 967101 100481518
Lap links are designed for quick, temporary chain repair applications. They can also be used for coupling of attachments to low carbon chains. To assemble, insert chain, then hammer link shut or close with a vise. It is recommended to use one size bigger than the chain size needed. Use with chain of equal or lower working load limit. Zinc plated Sometimes called open end or repair links Safe working load = 1250 lbs.
The Hillman Group 321690 3/8 x 2 inch Lap Links (5-Pack)
National Hardware's 1/4 Rope Clamp is designed for forming an eye or loop on wire rope. Steel body construction provides maximum durability. Install using pliers or vice for a secure connection. Rope Clamps are used to fasten two ropes together or form a loop on a single rope. Lay rope clamp on flat surface place rope side by side in clamps with prongs facing up hammer four prongs over both ends of rope. Light Duty Rating with 50 lbs.
National Hardware N100-317 Rope Clamp, 1/4 inch, Steel
Hardware Essentials 310218 (5/16-inch) 25 Pack Wire
HILLMAN 372053 Anchor, 1/4 in Dia, 3/4 in L, Steel, Zinc
National Hardware's 1/4 Rope Clamp is designed for forming an eye or loop on wire rope. Steel body construction provides maximum durability. Install using pliers or vice for a secure connection. Rope Clamps are used to fasten two ropes together or form a loop on a single rope. Lay rope clamp on flat surface place rope side by side in clamps with prongs facing up hammer four prongs over both ends of rope. Light Duty Rating with 50 lbs.
National Hardware N100-317 Rope Clamp, 1/4 inch, Steel
Hillman 1/4-in to 3/8-in Rope Clamp in the Chain Accessories
Chains, Cables, & Accessories
