1/4-10 x 3 Acoustical Eye Lag Screw Low Carbon Steel Zinc Plated
Eye lag toggle assemblies are primarily used for overhead applications and hanging suspended ceiling wire. Using a drill with a 5/8 in. bit, a hole is drilled into the plaster, clay tile or other hollow substrate. Winged end is inserted through drywall, acoustical tile, etc. and expands behind the surface while the 1/4 in. x 1-1/4 in. fender washer and hex nut secure the anchor on the exterior of the hole.
Toolpro 4 in. Eye Lag Toggle Assembly Screws, 100 Pack
Self Drilling Eye Lag For 1/4 Steel Box of 100
Hillman The Anchor Center 1/4 In. Acoustical Lag Screwdriver
Eye lag screws screw into wood ceiling joists to attach hanger wire for suspended ceilings. An eye lag screw is fashioned with an eye for threading the hanger wire and a lag thread on the other end for securing in the wood. Pre-drilling is recommended for the strongest attachment.
Everbilt 2.75 in. Eye Lag Screws for Wood (100-Pack) 805374 - The
Grabber 1/4 x 2-in Eye Lag Drive, Eye Lag Fine Thread, Drill
Suspended Ceiling Grid Self-Tapping Eye Lag Screws - 20 Pack at
Acoustical Lag Screws have sharp points, wood screw threads and a hole on the flat end. They can be driven with a driver tool, or installed using an
The Hillman Group 48281 1/4 X 3 Acoustical Lag Screw, 250-Pack
Hillman 1/4 In. x 3 In. Acoustical Ceiling Lag Screw (100 Ct